RAILWAY CROSSING PANEL LAMINATING AND BORING

 Railway Crossing Panel Laminating and Boring Machine

 

Overview and Features

The Pendu Railway Crossing Panel Laminating and Boring machine efficiently laminates timbers together and bores holes with countersinks to produce crossing panels that are ready for installation. The Laminating and Boring machine can laminate 200 panels in an 8 hour shift. Total material width of 1 to 4 timbers can range from 6″ to 32″. Material can be 6″ to 12.5″ tall and 7′ to 24′ long. The dowel and drill positions are controlled by computerized stops.

Product Specifications

Laminates: 200 per 8 hour shift
Material range: 6″-32″ wide (1-4 timbers), 6″ – 12 1/2″ tall, 7′-24′ long
Clamping: Vertical and Horizontal at operations
Horizontal drill and dowel adjustment range: 3″ – 5″ from roll bed
Dowels: 14″, 18″ and 28″ long dowels (3/4″ diameter)
Vertical drill adjustment range: 9″ – 11″ from horizontal dill center (along ballast), 4″ – 23″ range (8″ min between heads, across ballast)
Dowel and drill position controlled by computerized stop: 6″ – 24′ range